Amerex 1.1kg Halotron I Fire Extinguisher
- Buy 2 for A$1,087.80 each and save 1%
- Buy 4 for A$1,065.60 each and save 3%
The Halotron™ I clean agent has been determined to be the most environmentally beneficial halocarbon agent on the market today that meets wide performance standards.
DELIVERY COST:
FREE* SHIPPING: Sydney, Melbourne, Brisbane orders over $200 (metro areas). Other major cities orders over $499. Australia Wide delivery at discount rates. Delivery costs are calculated at the Cart page or at Checkout.
ORDER INCLUDES:
BRAND NEW – 5 YEAR WARRANTY
our Amerex B385TS Halotron Fire Extinguisher includes the following:
- 1 x Amerex B385TS Halotron fire extinguisher
- 1 x vehicle bracket
- COMPLIES WITH NFPA 10 STANDARD | ISO-9001/ ISO-14001 CERTIFIED | FM APPROVED
WHERE TO USE
- Aircrafts: planes, helicopters
- Racing cockpits: car, boats....
- any facility where dry chemical extinguishers could cause unacceptable damage or contamination.
These EXTINGUISHERS are pressurised using ARGON.
TECHNICAL INFO
|
Extinguisher Type |
B385TS |
|
Size |
1.1kg or 2.5 pounds |
|
Fire Rating |
2B:E / 2B:C |
|
Agent Type |
Halotron™ I |
|
Propellant |
Argon |
|
Extinguisher Height |
395 mm |
|
Cylinder Width |
165 mm |
|
Cylinder Volume |
1.1kg |
|
Full Weight |
2.4 kg |
|
Discharge Time |
9 s |
|
Material Valve |
Anodized Aluminum |
|
Handel Lever |
Stainless Steel 304 |
|
Cylinder |
Mild Steel |
|
Finish: Cylinder |
Powder Coated red |
|
Standard Approval |
ISO-9001/ ISO-14001 CERTIFIED |
|
Temperature Range |
-5°C to 50°C |
Amerex B385TS Halotron EXTINGUISHER SERVICE & MAINTENANCE:
In a business environment, all Halotron extinguishers must undergo hydrostatic testing and recharge every five years. All Halotron fire extinguishers must carry a maintenance tag that shows their last inspection date, and must be serviced every 6 months. Once your extinguisher has been discharged, it must be pressure tested & recharged, or replaced.
Amerex B385TS Halotron DO NOT USE ON:
Not recommended for lithium-ion battery fires.
Halotron extinguishers should not be used on class C and F fires.
