Australian Standards
Amerex Halotron B385TS - 1.1kg

Amerex 1.1kg Halotron I Fire Extinguisher

Amerex 0.6kg Halotron I Fire Extinguisher

Our Amerex MODEL A-384T contains a “Clean Agent” (HydroChloroFluoroCarbon HCFC-123) which is discharged as a rapidly evaporating liquid which is non-conductive, non-corrosive, and leaves no residue. It can be used on Class B and E fires. In Australia Halotron is approved by CASA as an acceptable replacement for Halon 1211 extinguishers in aircraft. Buy online and save over 30% at this amazingly cheap price. 6 weeks lead time upon order.
was A$1,055.00 Special Price A$1,010.10
Availability: In stock
SKU
A-384T
  • Buy 2 for A$997.90 each and save 1%
  • Buy 4 for A$960.20 each and save 5%
Maintenance Tag Stamped

The Halotron™ I clean agent has been determined to be the most environmentally beneficial halocarbon agent on the market today that meets wide performance standards.

DELIVERY COST:

FREE* SHIPPING: Sydney, Melbourne, Brisbane orders over $200 (metro areas). Other major cities orders over $499. Australia Wide delivery at discount rates. Delivery costs are calculated at the Cart page or at Checkout.

ORDER INCLUDES:

BRAND NEW – 5 YEAR WARRANTY

our Amerex A-384T Halotron Fire Extinguisher includes the following:

  • 1 x Amerex A-384T Halotron fire extinguisher
  • 1 x vehicle bracket
  • COMPLIES WITH NFPA 10 STANDARD | ISO-9001/ ISO-14001 CERTIFIED | FM APPROVED

halotron Fire extinguisher types and set up

WHERE TO USE

  • Aircrafts: planes, helicopters
  • Racing cockpits: car, boats....
  • any facility where dry chemical extinguishers could cause unacceptable damage or contamination.

These EXTINGUISHERS are pressurised using ARGON.

TECHNICAL INFO

Extinguisher Type

A-384T

Size

0.6kg or 1.4 pounds

Fire Rating

1B:E / 1B:C

Agent Type

Halotron™ I

Propellant

Argon

Extinguisher Height

255 mm

Cylinder Width

90 mm

Cylinder Volume

0.6kg

Full Weight

1.5 kg

Discharge Time

9 s

Material Valve

Anodized Aluminum

Handel Lever

Stainless Steel 304

Cylinder

Mild Steel

Finish: Cylinder

Powder Coated red

Standard Approval

ISO-9001/ ISO-14001 CERTIFIED

Temperature Range

-5°C to 50°C

Amerex A-384T Halotron EXTINGUISHER SERVICE & MAINTENANCE:

In a business environment, all Halotron extinguishers must undergo hydrostatic testing and recharge every five years. All Halotron fire extinguishers must carry a maintenance tag that shows their last inspection date, and must be serviced every 6 months. Once your extinguisher has been discharged, it must be pressure tested & recharged, or replaced.

Amerex B385TS Halotron DO NOT USE ON:

Not recommended for lithium-ion battery fires.

Halotron extinguishers should not be used on class C and F fires.

Write Your Own Review
You're reviewing:Amerex 0.6kg Halotron I Fire Extinguisher
Your Rating
We found other products you might like!