Amerex C571 Class D metal fire extinguisher
- Buy 2 for A$2,909.95 each and save 2%
The Amerex “soft flow” extension applicator is particularly suited for fighting Class D fires. It allows the operator to stand away from the extreme heat and toxic fumes caused by burning material. The easily controlled, even discharge provides a non-dispersing application of the agent. The extension applicator may be quickly detached to provide a straight stream of chemical where greater range is required.
DELIVERY COST:
FREE* SHIPPING: Sydney, Melbourne, Brisbane orders over $200 (metro areas). Other major cities orders over $499. Australia Wide delivery at discount rates. Delivery costs are calculated at the Cart page or at Checkout.
ORDER INCLUDES:
BRAND NEW – 5 YEAR WARRANTY
our Amerex C571 Class D Fire Extinguisher includes the following:
- 1 x Amerex C571 Class D metal fire extinguisher
- 1 x Wall bracket
- 1 x blank Maintenance Test Tag & Ring attached to the extinguisher
- COMPLIES WITH NFPA 10 STANDARD | ISO-9001/ ISO-14001 CERTIFIED | FM APPROVED
- Extra option available to purchase (not included if not selected) - 1 x maintenance tag punched ( with number 1)
Extinguishing Capacity:
- Lithium: 0.4 m² and/or 2.7kg of lithium
- Not recommended for lithium-ion battery fires.
WHERE TO USE
- Workshops
- Industrial units
- Factories
These EXTINGUISHERS are pressurised using ARGON. Argon is an inert gas that will not react with combustible metals. Nitrogen pressurising gas could cause a reaction when used on certain combustible metal fires. Air pressurising SHOULD NEVER be used, as even the slightest amount of moisture will cause a violent reaction will Class D Materials.
TECHNICAL INFO
Extinguisher Type |
C571 |
Size |
18 L |
Fire Rating |
D Lithium |
Powder Type |
Copper |
Propellant |
Argon |
Extinguisher Height |
850 mm |
Cylinder Height |
829mm |
Cylinder Width |
300 mm |
Cylinder Volume |
18 L |
Full Weight |
27.3 kg |
Discharge Time |
24 s |
Material Valve |
Chrome Plated Brass |
Handel Lever |
Stainless Steel 304 |
Cylinder |
Mild Steel |
Finish: Cylinder |
Powder Coated Yellow |
Standard Approval |
ISO-9001/ ISO-14001 CERTIFIED |
Temperature Range |
-5°C to 50°C |
Amerex C571 EXTINGUISHER SERVICE & MAINTENANCE:
In a business environment, all Class D METAL extinguishers must undergo hydrostatic testing and recharge every five years. All Class D METAL fire extinguishers must carry a maintenance tag that shows their last inspection date, and must be serviced every 6 months. Once your extinguisher has been discharged, it must be pressure tested & recharged, or replaced.
Amerex C571 EXTINGUISHER DO NOT USE ON:
Not recommended for lithium-ion battery fires.
Class D METAL extinguishers should not be used on class A, B, C, E and F fires.