Amerex 570 Class D metal fire extinguisher DCP
- Buy 2 for A$2,497.90 each and save 4%
- Buy 5 for A$2,397.90 each and save 8%
The Amerex “soft flow” extension applicator is particularly suited for fighting Class D fires. It allows the operator to stand away from the extreme heat and toxic fumes caused by burning material. The easily controlled, even discharge provides a non-dispersing application of the agent. The extension applicator may be quickly detached to provide a straight stream of chemical where greater range is required.
DELIVERY COST:
FREE* SHIPPING: Sydney, Melbourne, Brisbane orders over $200 (metro areas). Other major cities orders over $499. Australia Wide delivery at discount rates. Delivery costs are calculated at the Cart page or at Checkout.
ORDER INCLUDES:
BRAND NEW – 5 YEAR WARRANTY
our Amerex B570 Class D Fire Extinguisher includes the following:
- 1 x Amerex B570 Class D metal fire extinguisher
- 1 x Wall bracket
- 1 x blank Maintenance Test Tag & Ring attached to the extinguisher
- COMPLIES WITH NFPA 10 STANDARD | ISO-9001/ ISO-14001 CERTIFIED | FM APPROVED
- Extra option available to purchase (not included if not selected) - 1 x maintenance tag punched ( with number 1)
Extinguishing Capacity:
- Magnesium Chips: 0.4 m² and/or 2.7kg of metal
- Sodium or Potassium Spill: 0.5 m² and/or 2.2kg of metal
- Sodium or Potassium Spill Depth Over ”: 0.3 m² and or 2.7kg of metal
- Sodium Potassium Alloy Spill: 0.3 m² and/or 0.9kg of metal
- Also efficient on Zirconium, Uranium, Titanium, and powdered Aluminium
WHERE TO USE
- Workshops
- Industrial units
- Factories
These EXTINGUISHERS are pressurised using ARGON. Argon is an inert gas that will not react with combustible metals. Nitrogen pressurising gas could cause a reaction when used on certain combustible metal fires. Air pressurising SHOULD NEVER be used, as even the slightest amount of moisture will cause a violent reaction will Class D Materials.
TECHNICAL INFO
|
Extinguisher Type |
B570 |
|
Size |
13.5 L |
|
Fire Rating |
D |
|
Powder Type |
Sodium Chloride |
|
Propellant |
Argon |
|
Extinguisher Height |
889 mm |
|
Cylinder Height |
849mm |
|
Cylinder Width |
330 mm |
|
Cylinder Volume |
13.5 L |
|
Full Weight |
24.1 kg |
|
Discharge Time |
24 s |
|
Material Valve |
Chrome Plated Brass |
|
Handel Lever |
Stainless Steel 304 |
|
Cylinder |
Mild Steel |
|
Finish: Cylinder |
Powder Coated Yellow |
|
Standard Approval |
ISO-9001/ ISO-14001 CERTIFIED |
|
Temperature Range |
-5°C to 50°C |
Amerex B570 EXTINGUISHER SERVICE & MAINTENANCE:
In a business environment, all Class D METAL extinguishers must undergo hydrostatic testing and recharge every five years. All Class D METAL fire extinguishers must carry a maintenance tag that shows their last inspection date, and must be serviced every 6 months. Once your extinguisher has been discharged, it must be pressure tested & recharged, or replaced.
Amerex B570 EXTINGUISHER DO NOT USE ON:
Class D METAL extinguishers should not be used on class A, B, C, E and F fires.
